Anti-backlash nut

Not in stock
€ 11,33
€ 9,76

Description: Helps to reduce, if not eliminate, backlash. This anti-backlash nut fits on to the integrated lead screw motor to replace the standard nut.

Product code: 00272

Lead screw 2 pieces

Not in stock
€ 21,53

Description: Set two lead screw T8x8 with nut. Suitable for 3D printer as a shift of axis Z. Lead screw have a diameter 8 mm and a length 30 cm. The thread pitch is 8 mm. In combination with a flexible coupling can be applied as an upgrade to the existing Z…

Product code: 97-1

Structural frame for 3D printer Evolution S1

In stock
€ 101,57
€ 81,96

Description: Structural frame for printers -Evolution S1 and Prusa. This is a very good and solid frame for a 3D printer. The package contains part of travel for the heatbed mk2a or MK2b.

Product code: 00175

Manufacturer: Siran Evolution

Lead screw 2 pieces - 400mm

Not in stock
€ 39,18

Description: Set two lead screw T8x8 with nut. Suitable for 3D printer as a shift of axis Z. Lead screw have a diameter 8 mm and a length 40 cm. The thread pitch is 8 mm. In combination with a flexible coupling can be applied as an upgrade to the existing Z…

Product code: 00122

Linear shaft support - SK8

Not in stock
€ 2,31

Description: Linear shaft support with diameter of 8mm. Dimensions: Mounting hole spacing: 32 mm Mounting holes diameter: 5.5 mm For mounting shaft with a diameter of: 8 mm Height from base to center of bar: 20 mm

Product code: 00212

Linear shaft support - SK10

Not in stock
€ 2,31

Description: Linear shaft support with diameter of 10mm. Dimensions: Mounting hole spacing: 32 mm Mounting holes diameter: 5.5 mm For mounting shaft with a diameter of: 10 mm Height from base to center of bar: 20 mm

Product code: 00158

Set of 12 magnets for magnetic closing arm

In stock
€ 7,41
€ 3,88

Description: Set 12 neodymium magnets - bed for magnetic connection shoulders and extruder. Suitable for use with balls from our menu. Magnetic connection is mainly used for 3D printers DELTA - Kossel. Neodymium magnet having an outer diameter of 12 mm,…

Product code: 134

Brass Trapezoidal T8 Nut

Not in stock
€ 3,53

Description: Replacement brass trapezoidal nuts T8 on the trapeze bar with 8 mm pitch.

Product code: 00096

10pcs Brass Insert Threaded M4

Not in stock
€ 1,37

Description: Brass thread inserts into plastic. To be screwed into the printed piece screw with a diameter of 4 mm? Insert the plastic liner and reinforce this so the whole joint. The liner can be inserted into the plastic pushing the warming by heating or…

Product code: 00106