E3D Nozzle X - V6 0.4 mm

In stock
€ 32,19
€ 30,99

Description: The Nozzle X is our NEW ‘One to rule them all’ nozzle, made from a special alloy of tool steel we have been able to create a nozzle that is immensely hard, but also maintains its hardness to high temperatures without softening. We have also added a…

Product code: 00268

Manufacturer: E3D

Fan 40x40x10mm

In stock
€ 4,23
€ 2,68

Description: 12v DC fan for use with any E3D HotEnd

Product code: 00267

Manufacturer: E3D

E3D Heater block v6 for termistor

Not in stock
€ 12,41

Description: This heater block works with our thermistor sensor for V6... Along with our other temperature sensor, this now allows you easily swap to use our high temperature, high accuracy PT100 temperature sensors on your E3D-v6 HotEnd, or a Type-K Thermistor.…

Product code: 00254

Manufacturer: E3D

Volcano heater block

In stock
€ 21,33
€ 19,35

Description: A specialised heater block for your HotEnd; part of the E3D Volcano upgrade kit.

Product code: 00252

Manufacturer: E3D

V6 Fan Duct

In stock
€ 1,36

Description: A fan duct for the V6 HotEnd, injection moulded out of translucent blue polycarbonate. They are much harder wearing than printed parts and significantly less prone to vibration. These fan ducts are included as standard with all V6 Hot End kits.

Product code: 00214

Manufacturer: E3D

Thermal Compound Paste

In stock
€ 1,51

Description: This 1g sachet is the same that comes with our HotEnd kits, and is perfect for helping your heatsink to dissipate excess heat. It's made up of: Silicone Compounds 50% Compounds of carbon: 20% Metal Oxide Compounds: 30%

Product code: 00213

Manufacturer: E3D

E3D Heater block v6

Not in stock
€ 16,25

Description: This heater block works with our New Standard thermistor sensor for V6... Along with our other temperature sensor cartridges, this now allows you easily swap to use our high temperature, high accuracy PT100 temperature sensors on your E3D-v6 HotEnd,…

Product code: 00211

Manufacturer: E3D

Linear bearings LM8UU

In stock
€ 1,55
€ 1,40

Description: LM8UU Linear Ball Bearings for 8mm shaft.

Product code: 00007

Manufacturer: E3D

Heater cartridge 30W 24V

In stock
€ 8,34
€ 6,94

Description: 24V 30w Ceramic Heater Cartridge

Product code: 00191

Manufacturer: E3D

Heater cartridge 30W 12V

Not in stock
€ 8,34

Description: 12v 30w Ceramic Heater Cartridge

Product code: 00190

Manufacturer: E3D

E3D Lite6 - 1,75mm 24V

In stock
€ 40,33

Description: A complete set of original hotend lite6 from E3D. (12V) Hotend is very popular among beginners and advanced printers. Its popularity demonstrates the use of advanced printers Prusa I3 plus. You can print it with a large number of print materials,…

Product code: 00178

Manufacturer: E3D

Heater cartridge 40W 24V

In stock
€ 8,34

Description: 24V 40w Ceramic Heater Cartridge

Product code: 00144

Manufacturer: E3D

Side blow fan 0,25A

In stock
€ 8,14

Description: 50x50x15mm 12v DC Side Blow Fan for 3D printing

Product code: 00138

Manufacturer: E3D

Thermistor Replacement Kit

In stock
€ 6,79

Description: A kit containing the parts you need to replace a broken thermistor. Kit includes: 1x Semitec 100K thermistor - (standard in all E3D hotends) 100mm of Fibreglass sleeving 4x Ferrules for joining wires A length of heatshrink for insulation

Product code: 160

Manufacturer: E3D

Termistor cartridge

Not in stock
€ 7,37

Description: A custom made thermistor encapsulated into an easy to use cartridge package. Using our proven Semitec 104GT thermistors, which are then potted into a cylindrical copper cartridge with a high conductivity ceramic based adhesive. The legs are…

Product code: 159

Manufacturer: E3D

Titan Aero 1,75mm 12V

Not in stock
€ 135,70

Description: Titan Aero integrates the Titan extruder and V6 HotEnd into one neat little package. All the lightweight performance, reliability and usability of V6 and Titan, along with some benefits all of its own.

Product code: 00128

Manufacturer: E3D

E3D HotEnd v6 - 1,75mm 24V

Not in stock
€ 75,20

Description: The latest version of the popular hotend v6 from the manufacturer - E3D. This is an original not a problems copy from China. This hotend is used in Prusa printers. Version: 24V

Product code: 00126

Manufacturer: E3D

Nozzle 0,50 mm

In stock
€ 8,49

Description: Extra nozzle for E3D HotEnds.

Product code: 00115

Manufacturer: E3D

Multihotend CHIMERA

Not in stock
€ 102,77

Description: Simple and high-quality dual HotEnd / Multihotend Chimera from E3D with two nozzles. Designed for 1.75 mm filament. Do you want color printing without cleaning object? You do not have to worry about cleaning nozzles. From each nozzle, based on a…

Product code: 00111

Manufacturer: E3D